IEEE Microwave Theory and Techniques Society
RF Aspects of Magnetic Resonance
Dr. Robert H. Caverly
Professor of Electrical Engineering
Villanova University, Villanova, PA USA
6:30P.M. Pizza and Networking
Skyworks Conference Room
649 Lawrence Drive, Newbury Park
Magnetic Resonance Imaging (MRI) scanners are an important diagnostic tool for the medical practitioner. MRI provides a non-invasive means of obtaining high contrast images of soft tissues and to obtain real-time images of the cardiovascular system and other dynamic changes in the human body. MRI scanners rely heavily on a number of topical areas of interest to Electrical Engineers: image processing, high speed computing and RF (radio frequency) systems and components.
This presentation will focus on some of the RF aspects of the MR process and MR scanners. A primer on the physical phenomenon behind magnetic resonance will start the presentation and include a discussion of the origin of the MR signal. The need for the high static magnetic field (B0), the use of gradient coils for MR signal location, simple RF pulse sequences and how they are used in image construction will be covered. This MR image construction process and the control of the various steps that manipulate the atomic nuclei to generate the final MR diagnostic image put demanding constraints on RF equipment capabilities and these will be discussed, along with a high-level overview of the various components making up conventional MRI systems. This high-level overview will include a look at various examples of transmit and receive RF systems and examples of transmit and receive coils that make up MR scanners and system diagrams for both the RF transmit and receive paths. The talk with then narrow in scope to look at how these RF coils are modeled and controlled in both transmit and receive states and how these components are used for transmit/receive switching and patient and equipment protection.
Dr. Robert H. Caverly received his Ph.D. degree in electrical engineering from The Johns Hopkins University, Baltimore, MD, in 1983. He has been a faculty member at Villanova University in the Department of Electrical and Computer Engineering since 1997 and is a Full Professor. Previously, he was a Professor for more than 14 years at the University of Massachusetts Dartmouth. Dr. Caverly’s research interests are focused on the characterization of semiconductor devices such as PIN diodes and FETs in the microwave and RF control environment. He has published more than 100 journal and conference papers and is the author of the books Microwave and RF Semiconductor Control Device Modeling and CMOS RFIC Design Principles from Artech House. An IEEE Fellow, Dr. Caverly is an Associate Editor of the IEEE Microwave Magazine and a member of the HF-VHF-UHF Technology (TC-17) and Biomedical Applications (TC-10) Technical Committees of the MTT Society.
His webpage is http://rcaverly.ece.villanova.edu/rcaverly/rcaverly.htm